The Noga Anti Twist Plate is the latest addition to our Lenzlock Anti Twist Environment.
You can now use your Standard Lenzlock Mini & Hi5 Version Quick Release Adapters with the Noga HoldIt Arms. Not compatible with the Receiver Version.
No more unattended twisting. You can use it on both sides of the Arm and on Top and Bottom plate of our Lenzlocks.
Since the Noga HoldIt Arm has a M6 and a 1/4“-20 UNC Thread hole our Noga Anti Twist Plate comes with a M6 Screw. For the 1/4“-20 side you can use our long 1/4“ Screw that came with the Standard and Hi5 Version Lenzlocks.
Very important: PLEASE READ THE INSTRUCTION & /or WATCH THE INSTRUCTION VIDEO /WE ARE NOT LIABLE FOR ANY DAMAGE OCCURING ON YOUR NOGA ARM.
Do not mix up the Threads and force a screw in the wrong Thread hole.
There are 2 different Threads on the Noga Arm. M6 & 1/4-20“ UNC.
M6 is not interchangeable or compatible with 1/4“-20 UNC.
To use the Plate with the Lenzlock on your Noga HoldIt Arm you need to remove the screws on the ends.
Depending on your Setup you can also just change one side.
1/4“-20 UNC Side
If you want to mount it to the end with the long 1/4" Screw, you will need to heat it carefully using a heat gun, because it is glued in with Loctite. Now you can remove the 1/4" Screw easily.
Use a 1/4" screw for Lenzlocks, to mount your Lenzlock with the Anti Twist Plate to your Noga Arm.
If you want to change the other end remove the 3/8" Screw.
Take the M6 screw, put it through the 3/8" thread hole of your Lenzlock (do not force it through the 1/4"-20 thread hole!) and mount the Anti Twist Plate and screw it in your Noga HoldIt Arm.